Creating Alignment Using AutoCAD Civil 3D

 

AutoCAD Civil 3D is industry's top software by Autodesk for various types of engineering projects such as roads, highways, motorways, stormwater sewer, sanitary sewer etc. These projects can be classified as Infrastructure projects.

 An Alignment is a Civil 3D entity in two dimension and describes centerline of road or pipe. It's important to create an alignment accurately, as it determines the final layout of the project.

In this article, we will briefly discuss the various options available in autoCAD Civil 3D for creating of Alignments.

Creating an Alignment:

To create an alignment, follow these steps:

• Open the AutoCAD Civil 3D software and click on the Home > Create Design > Alignment button.

Alignment Command

• It will open a menu as shown below:

Alignment Creation Menu

• This menu contains various options for creating an Alignment. I have numbered these options from 1 to 10. Let me describe these one by one briefly.

• Alignment Creation Tools

It is used to create New Alignment using Tangents and Curves from scratch. It prompts for creation of Tangents and Curves with different options. Also compare it with Create Alignment from Objects.

 This is one of the most frequently used option.

• Create Best Fit Alignment

If your alignment is very simple alignment and regression equations can be used to describe geometry of your Alignment. Otherwise, you will need to split up your alignment into smaller parts and use the "Create Best Fit Alignment" option. 

• Create Alignment from Objects

This option can be used to create Alignment from other objects such as Polyline, 3D polylines and Feature lines already created in the drawing. It is also one of the most frequently used options used to create alignments.

• Create Alignment from Corridor

In certain cases, Alignment needs to be created from feature lines of a corridor. This option will create alignment from feature line of a corridor. 

• Create Alignment from Network Parts

To represent Network parts on a profile, an alignment will be created so that we can draw its profile and project the network parts on that profile. Further labels can be added to the profile. 

• Create Alignment from Pressure Network

This option is same as Network Parts but will create Alignment from Pressure Network parts.

• Create Alignment from Existing Alignment

This option can be used to create Alignment from existing Alignment. 

• Create Offset Alignments

Offset Alignments are created for various functions such as widening.

• Create Connected Alignment

Connected alignment can be created using this option. It will associate the alignment with each other at the intersection point and their profile at intersection point will have same elevation. These profiles can be raised or lowered at the same time. It comes handy in creation of intersections.

• Create Widening

It also creates an offset alignment will widening options.

  Further details of each option can be checked on Autodesk website.